Tools Last update: Nov 11, 2026

Percent Error Calculator

Calculate the percent error between a measured value and the true value – with the absolute, relative and signed error, step by step.

—

The formula

Percent error = |measured − true| / |true| × 100%

The true value is the accepted or theoretical one – from a reference book, a standard or a calculation. The measured value is what you got in your experiment.

Worked example

You measure the acceleration due to gravity as 9.6 m/s². The accepted value is 9.81 m/s². |9.6 − 9.81| = 0.21, 0.21 / 9.81 = 0.021407, so the percent error is 2.14%.

Absolute, relative and signed error

  • Absolute error – the difference in the original units: 0.21 m/s².
  • Relative error – the same as a fraction: 0.0214.
  • Signed error – keeps the direction: −2.14% means the measurement was too low.

What is a good percent error?

It depends on the experiment. In school labs, a few percent is usually acceptable; precise lab work aims for well under 1%. A large error suggests a systematic problem – a badly calibrated instrument, a misread scale or a wrong assumption.

Percent error is not the same as percentage change: percent error compares with a true value, percentage change compares with an earlier value.

Frequently asked questions

Can percent error be negative?

The usual formula uses the absolute value, so it is always positive. The signed version shows whether the measurement was too high (+) or too low (−).

Why divide by the true value and not the measured one?

Because the error is judged against the correct answer. Dividing by the measurement would give a slightly different number.